7 Best Exhaust Tailpipe Repair Tools on the market now

Looking for the best Exhaust Tailpipe Repair Tools?

The “best” Exhaust Tailpipe Repair Tools is a matter of personal preference. But durability, responsive customer service and quality are factors everyone can appreciate. You’ll find all of the above in our top below.

TOP 10

No. 2
Permatex 80335 Muffler and Tailpipe Sealer, 3 oz.
  • Seals holes and leaks in mufflers, tailpipes and around joints
  • Makes new installations more secure
  • Waterproof, non-shrinking paste formula; shock resistant
  • Temperature Range: up to 2000°F (1000°C)
  • Suggested Applications: Mufflers, tailpipes, joints, and catalytic converters; exhaust system must be cool before applying
SaleNo. 3
J-B Weld ExhaustWeld 2' x 72' Repair Wrap
21 Reviews
J-B Weld ExhaustWeld 2" x 72" Repair Wrap
  • J-B WELD EXHAUSTWELD: A high strength fiberglass wrap, impregnated with a specially formulated resin for high temperature resistant repairs. ExhaustWeld can resist up to 1100°F once it is fully cured!
  • CURE AND SET TIME: ExhaustWeld can cure with or without heat! It will cure within 20 minutes if heat is applied to it with either a heat gun or by letting the engine run. Without heat, ExhaustWeld will set in 20 minutes and cure in 2 hours.
  • HIGH HEAT RESISTANCE: Once fully cured, J-B Weld ExhaustWeld Exhaust System Repair Wrap has a temperature resistance of 1100°F, allowing it to be used on every part of the exhaust system!
  • APPLICATIONS: Manifolds, Catalytic Converters, Mufflers, Tailpipes and more!
  • EVERYTHING YOU NEED: The kit includes a pair of gloves and a .5" x 24" piece of aluminum tape!
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.
SaleNo. 4
J-B Weld FiberWeld 2' x 36' Automoitve Repair Cast
2 Reviews
J-B Weld FiberWeld 2" x 36" Automoitve Repair Cast
  • FIBERWELD AUTOMOTIVE REPAIR CAST: A high-strength fiberglass wrap, impregnated with a specially-formulated resin for automotive repairs. When activated by water, the product forms a strong, permanent bond that hardens like steel in 15 minutes. Once cured, FiberWeld is temperature resistant up to 400°F and holds water pressure up to 100 PSI.
  • SOAK IT, WRAP IT, DONE: Once the wrap is dipped in water for 5-7 seconds, FiberWeld Automotive Repair Cast has a working time of about 5 minutes and a cure time of 15 minutes! The product achieves full strength in about 2 hours.
  • PRODUCT FEATURES AND STRENGTH: Once fully cured, J-B Weld FiberWeld Automotive Repair Cast has a temperature resistance of 400°F, holds water pressure up to 100 PSI, and can be sanded and painted!
  • AUTOMOTIVE APPLICATIONS: Radiator & heater hoses, tailpipes & mufflers, oil & transmission lines, vacuum lines, outside mirrors & roof racks, and RV & boat emergency repairs.
  • EVERYTHING YOU NEED: The kit includes a pair of gloves and a 2" x 24" securing bandage!
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.
SaleNo. 5
OEMTOOLS 27045 Tailpipe Cutter, Features Pipe Cutter Chain w/ Cutting Wheels, Exhaust Pipe Cutter w/ Cushion Grips, Can Be Used as PVC Cutter or Copper Pipe Cutter
  • CUT ON OR OFF THE VEHICLE: Get a clean cut with minimal rough edges or burrs on your exhaust pipe or tailpipe with our pipe cutters; Cut tailpipe and exhausts on or off the vehicle with ease for making repairs or installing catalytic converters
  • EFFECTIVELY CUT TAILPIPES: Work on tailpipes and exhaust pipes with diameters ranging from 3/4" to 3-1/4" (19-83 mm); Lubricating the exhaust cutter cutting wheels before use will give an even smooth cutting operation and extends the life of the item
  • EASY TO USE: Cut pipe with our pipe cutter tool in four easy steps; Wrap chain around the pipe, hook the chain onto the plier jaw, close plier jaw until pipe cutter wheels are tight on the pipe, hand rotate chain around pipe until pipe is cut
  • NO POWER TOOLS NEEDED: Breaking out the Sawzall or angle grinder is unnecessary with our exhaust cutter tool; Work in cramped spaces with one-handed rotation; The cushion grip handles ease pressure on your hand while you increase your grip
  • BUILT TO LAST: This quality metal pipe cutter's cutting wheels won’t dull easily during use; The head of the exhaust cutting tool won’t bend from during rotation; Use as a copper and PVC pipe cutter; Lightly lubricate cutting wheels before use
SaleNo. 6
Lisle 38350 Exhaust Hanger Removal Pliers
  • This tool separates the rubber supports from exhaust hanger brackets.
  • The tool works on all import and domestic car and truck exhaust systems that use the rubber hanger supports.
  • The operator simply squeezes the pliers handles to force the rubber support from the exhaust hanger to make a difficult job much easier.
  • The tool works on all import and domestic car and truck exhaust systems that use the rubber hanger supports. The operator simply squeezes the pliers handles to force the rubber support from the exhaust hanger to make a difficult job much easier.
No. 7
GEARWRENCH Exhaust and Tailpipe Cutter - 2031DD
  • "Cut pipes 3/4" to 3" and 19mm to 76mm in diameter"
  • Fifteen blades effectively cut pipe so only a 100 degree rotation is needed for a complete cut
  • Serviceable tool works in hard-to-reach areas
  • Will not cut double-wall pipes
  • Keep well oiled
  • Not for use on stainless steel

Click to rate this page !
Thanks !

Last update on 2021-11-29 at 16:45 / Affiliate links / Images from Amazon Product Advertising API