7 Best Engine Valve Train Tools on the market now

Looking for the best Engine Valve Train Tools?

The “best” Engine Valve Train Tools is a matter of personal preference. But durability, responsive customer service and quality are factors everyone can appreciate. You’ll find all of the above in our top below.

TOP 10

No. 1
Orion Motor Tech 10pcs Solid Valve Spring Compressor, Automotive Compression C-Clamp Tool Service Kit for Motorcycle, ATV, Car, Small Engine Vehicle Equipment
  • EFFICIENT VALVE REMOVAL/INSTALL - Everything you need to safely remove or install valve springs, including the wide C-clamp, extension screws, and pushers with 5 collet sizes for a precise fit on almost any automotive or small engine valve spring and cylinder head.
  • DURABLE STEEL CONSTRUCTION - With forged steel construction for superior strength and hardness, this C-Clamp will not bend or twist under the stress of compressing valve springs. The smooth surface is finished with oxide to resist rust and corrosion.
  • SIMPLE OPERATION - Close the coil spring compressor until touching the center rod, and insert the compressor into the coil spring. Carefully compress the spring for removal or install and only release compression when the spring is set for install. Handle with caution.
  • TOOL STORAGE CASE - This toolset comes packaged in a high-impact, custom-molded case that holds each part securely for convenient organization and easy transport.
  • SATISFACTION GUARANTEED - If any component of the toolset is defective, the manufacturer will exchange the product or accept a return. Orion Motor Tech’s outstanding customer service team will promptly follow up with any service request.
No. 2
AutoWanderer Tool Solid Valve Spring Compressor C Clamp Tool Set Service Kit with 10 Pcs Fit Motorcycle, ATV, Car, Small Engine Vehicle Equipment
  • 🚗【𝐃𝐈𝐕𝐄𝐑𝐒𝐈𝐅𝐈𝐂𝐀𝐓𝐈𝐎𝐍 𝐎𝐅 𝐔𝐒𝐄】--AutoWanderer Tool valve spring compressor tool kit is specially designed to help REMOVE AND COMPRESS VALVE SPRING CONVENIENT. It can be used not only with the engine head still on the engine and in the car, but also with the engine head removed. The tool holds the bolt on the engine head while the lever rotates around the base to compress the spring, which can be easily removed or installed to compress the valve spring.
  • 🚗【𝐖𝐈𝐃𝐄 𝐀𝐏𝐏𝐋𝐈𝐂𝐀𝐓𝐈𝐎𝐍𝐒】--The Valve Spring Installer Remover Compressor Tool Set with MULTI-SIZE PUSHERS satisfies different needs. ALL COLLETS ARE 1.75 INCHES (4.4CM) LONG WITH 9.5 INCH (24.1CM) MAXIMUM JAW OPENINGS. 16mm,19mm,23mm,25mm,30mm pushers suitable for various spring diameters on most cylinder heads fit for Most Car, Small Van, ATV, UTV, motocycles & other small engines vehicles.
  • 🚗【𝐑𝐄𝐅𝐔𝐒𝐄𝐃 𝐓𝐎 𝐁𝐄𝐍𝐃】 - THE HANDLE IS MADE OF SOLID STEEL, NOT EASY TO BEND AND DEFORM when compressed, with maximum strength and longevity. And the two end of C-type clamp is aligned in a standard straight line,NOT EASY TO SLIP DURING USE. And its smooth surface is coated with black oxide to provide superior strength and corrosion resistance and withstand the stress of your compressed springs.
  • 🚗【𝐒𝐈𝐌𝐏𝐋𝐈𝐅𝐘 𝐎𝐏𝐄𝐑𝐀𝐓𝐈𝐎𝐍】--Close the coil spring compressor until it touches the center rod and insert the compressor into the coil spring. Compression of the spring is required for both disassembly and installation, but the spring is released from compression only during installation. THE COMPRESSED SPRING CONTAINS A LARGE AMOUNT OF STORED ENERGY, SO BE SURE TO HANDLE THE SPRING CAREFULLY WHEN UNCOMPRESSING IT.
  • 🚗【𝐖𝐇𝐀𝐓 𝐘𝐎𝐔 𝐆𝐄𝐓】--PACKAGE INCLUDES:5* STRONG METAL COLLECTS/EMBEDDED PUSHERS (16MM,19MM,23MM,25MM,30MM);3* EXTENSION SCREWS;1* COMPRESSION BAR/C-FRAME;1* HAND LEVER,AND 1* STORAGE CASE FOR YOUR CONVENIENCE.If you encounter any problems with our products or during use, please feel free to contact us,we are here to provide professional technical support in 24h and will do our best for your satisfaction.
No. 3
UTMALL Engine Valve Spring Compressor Stem Seal Removal Tool for BMW VW Audi Mercedes
  • assembly and disassembly of valve springs and replacement of valve stem seals on cars
  • Without removing the cylinder head
No. 4
Valve Pressure Spring Installer/Remover for BMW N13, N20, N26, N51, N52, N53, N54, N55 Engines Valve Torsion Spring Disassembly Tool, Pressure Spring Installer Remover Hand Tool Intermediate Levers
42 Reviews
Valve Pressure Spring Installer/Remover for BMW N13, N20, N26, N51, N52, N53, N54, N55 Engines Valve Torsion Spring Disassembly Tool, Pressure Spring Installer Remover Hand Tool Intermediate Levers
  • Applicable Vehicle: This valve pressure spring tool for BMW N13, N20, N26, N51, N52, N53, N54, N55, replace part number: 117110
  • Worked Good: Works for valvetronic springs, install and disassembling the cylinder head on engine without damaging
  • As Perfect AS OEM: Engines valve spring tool professionally designed for BMW, While this is not OEM, It worked as well as the OEM tool, and some performance than the original manufacturers, which will help you save much money
  • Material: All the valvetronic spring tools through rigorous engine testing to ensure high-precision matching, made of high quality steel , the products weight 4.3 pounds, enough to explain our quality
  • Lifetime Warranty: We offer lifetime warranty, we will refund or replace, if the valvetronic spring tool have any quality problem , or you can contact us, we will serve you wholeheartedly
No. 5
Aramox Valve Spring Compressor, Cylinder Head Valve Spring Compressor Stem Seal Replacement Tool for OHV OHC Engines
  • Main Application: The spring compressor design for use on a wide range of OHV, OHC engines but not suitable for use on engines with deep seated valves.
  • Convenient to operate: This engines spring compressor is suitable for the replacement of valve springs and valve stem oil seals without the need to remove the cylinder head. Use in conjunction with Model No.VS1601 compressed air adaptor.
  • Professional manufacturing: Adjustable handle, claws and hooks allow use on most OHV engines. Professional cylinder head valve spring compressor, very easy to use.
  • Adjustable valve removal installer tool: Tool spring depth reach grips to retainer are adjustable to fit most large and small spring applications.
  • After sales service: Aramox is a professional seller. If you meet any trouble when you use our device, you can contact our customer service staff, They will provide you with solution in time.
No. 6
ABN Automotive Engine Overhead Valve Spring Tool Set, Remover and Installer Kit Compatible with Ford, BMW, Honda, Toyota
  • [Valve Spring Service Made Easy]: Use the ABN Automotive Engine Overhead Valve Spring Tool Set to install, remove, and compress your vehicle’s valve spring without having to meticulously remove the cylinder head from the engine
  • [Built to Last]: Constructed from forged steel with black finish for maximum strength and longevity that resists rust and corrosion; Pole is constructed from iron and is 20 inches (50.8cm) long with a 0.59-inch (1.5cm) diameter
  • [Easy Storage and Organization]: No need to worry about losing parts in a garage drawer or tool kit; Heavy-duty 18.5” x 3.5” x 10.25” inch (47cm x 8.9cm x 26cm) blow-molded carrying case with handle for easy transportation, safe storage, and quick organization
  • [Easy to Use]: Multipoint adjustable base bolts into head while lever mechanism pivots from bar to compress the spring; Large openings on both sides of compression tube allow for removal and installation of spring retaining keeper; Includes both common size spark plug hole air fittings for hooking compressed air directly to cylinder
  • [Fit for Your Vehicle]: Universal for most overhead cam valvetrains; Use on overhead valves (OHV) and overhead camshaft (OHC) gasoline or diesel engines; Compatible with Audi (4 and 5 cylinder), BMW, Chevrolet, Chrysler, Ford, GM, Honda, Lincoln, Mazda, Mitsubishi, Nissan, Porsche (924 and 928), Saturn, Toyota, Volvo, Volkswagen VW (4, 5, 6 cylinder), and more
No. 7
MOSTPLUS Engine Overhead Solid Valve Spring Compressor Automotive Tool C Clamp Service Set-10 Pieces
  • Package Includes: 1 x Spring Compressor "C" Clamp 5 x Adaptors 3 x Extension Screws 1 x Compression Bar
  • Professional valve spring compressor tool allows you to remove and compress valve springs on most cylinder heads more convenient.
  • Comes with 5 adaptors for various spring diameters, as well as to fit valve spring correctly for safe and easy compression.
  • Made of solid steel material, heavy duty construction, sturdy and durable
  • Fitment: For most car, small van, motorcycle engines

Click to rate this page !
Thanks !

Last update on 2021-11-29 at 16:45 / Affiliate links / Images from Amazon Product Advertising API